Ivoclar Vivadent Tetric N-Ceram Bulk Fill Syringe Refills
8 in stock
Light cure composite
Starting at: $1240.00
| Ivoclar Vivadent Tetric N-Ceram Bulk Fill Ref. 1x3.5g IVA |
$1240.00 |
-
+
|
In Stock | ||
| Ivoclar Vivadent Tetric N-Ceram Bulk Fill Ref. 1x3.5g IVB |
$1290.00 |
-
+
|
In Stock | ||
| Ivoclar Vivadent Tetric N-Ceram Bulk Fill kit (IVA/IVB) |
$2440.00 |
-
+
|
In Stock | ||
| Ivoclar Vivadent Tetric N-Ceram Bulk Fill Universal Shade IVA |
$1250.00 |
-
+
|
In Stock |
Tetric N-Ceram Bulk Fill by Ivoclar Vivadent is a light curing, packable composite resin used in restoration of posterior teeth. It is a part of the nano-optimized Tetric N-Collection. Tetric N-Ceram enables restoration of posterior teeth with only one layer, when the cavity is up to 4 mm in thickness. The incorporation of a patented light initiator ‘Ivocerin’ is responsible for ensuring complete cure of the filling. When compared to conventional light initiators and activators, the Ivocerin polymerization booster is much more reactive. A conditioned shrinkage stress reliever has been added to reduce shrinkage and shrinkage stress. This light cure composite can be cured with light in the wavelength ranging between 400 – 500 nm (blue light) and can be filled in increments off 4 mm. This saves a lot of chair time, which is a valuable resource for dentists.
- Class I and Class II posterior tooth restorations
- Restoration of primary teeth
- Class V restorations
- Preventive restorations in molar and premolar teeth
Features
- Patented light initiator ‘Ivocerin’
- Special filler technology
- Esthetic results
- Reduced volumetric shrinkage and shrinkage stress
Packaging
Directions to use
- Remove the VivaPen cap by turning it until noticeable resistance is felt and simultaneously pulling it off.
- Attach the VivaPen brush cannula. The cannula can be rotated up to approximately 270° to the desired position.
Attention: Rotating the cannula past the point of resistance will detach the cannula!
- For hygienic reasons, always use a VivaPen protective sleeve by sliding the Pen with the cannula into the protective sleeve until the cannula punctures through the sleeve.
- A new cannula and protective sleeve must be used for each patient.
- Activate the click mechanism 2-3 times until the cannula tip is sufficiently coated with Tetric N-Bond Universal. The wetting of the cannula tip is recognized by the yellow colour of Tetric N-Bond Universal.
- If used several times on the same patient, the moistened cannula must be protected from light.
- Remove the protective sleeve and cannula after using the VivaPen. Remove the cannula by turning it until noticeable resistance is felt and simultaneously pulling it off.
- Close the VivaPen with the original cap.
There are no reviews yet.