Prevest Denpro Renew Universal – Kit Pack (10019)
7th Gen. Self Etch Universal Bonding Agent
₹2050.00₹3200.00 (-36%)
Out of stock
Benefits
Brand warranty
Secure payments
upto 7 days returnable
Long expiry
EMI
Description
Renew Universal is a light-cured single-component dentine bonding agent that combines etching, priming and bonding in one bottle. A novel universal dental adhesive containing a unique combination of functional monomers such as 10-MDPand 4-META.It has excellent bonding capabilities to dentin and cut / under-cut enamel.
As a universal adhesive, Renew Universal has been designed to be fully compatible with light-cured and dual-cured composite materials. Renew Universalcanbe used for the bonding of both direct and indirect restorations and may be used with or without phosphoric acid etchant.
Indications :
- Direct bonding of light-cured composites, compomers and ormocers to tooth structure.
- Bonding of dual-cured core build up composites to tooth structure as long as these materials are light-cured.
- Intraoral repair of composite, metal-based and zirconia/alumina-based
restorations. - Intraoral repair of ceramic restorations in combination with a silane coupling
agent. 5. Treatment of hypersensitive teeth. 6. Sealing of tooth preparation (cavity or
abutment).
Contraindications :
- Patients with a history of hypersensitivity to methacrylate monomers.
- Do not use as a pulp capping agent.
- Not to be used with chemical curing composites.
- Do not use eugenol-containing materials prior to the use of Renew Universal, since the eugenol can retard the curing process.
- Not to be used with desensitizers.
Specification
Additional information
| Weight | 0.1 kg |
|---|---|
| Brands |
Features
Features
- A novel universal dental adhesive containing a unique combination of functional monomers such as 10-MDP and 4-META.
- Intraoral repair of composite, metal-based, ceramic restorations in combination with a silane coupling agent and zirconia/alumina-based restorations.
- Excellent bonding capabilities to dentin and cut /under cut enamel.
- Fully compatible with light cured and dual cured composite materials.
Packaging
Packaging
- 2 x 5ml Bottle
- 40 x Micro Brushes
- 1 x Instruction Manual
Direction to Use
Direction to Use
1. BONDING PROCEDURE
Cavity Preparation : Prepare tooth using standard techniques. Make sure that the
temporary material is thoroughly removed from the surface. Use rubber dam for protection.
Rinse and dry the prepared tooth surfaces by gently blowing with an air syringe.
2. TREATMENT OF TOOTH SURFACES
Select out of the following 3 technique options :
a) Self-etch technique : Apply Renew Universal to bur-cut enamel and dentin, without a
separate etching step. Note : Non bur-cut enamel should always be treated with a 35-40%
phosphoric acid gel for 10 seconds, rinsed with water for 5 seconds and gently dry.
b) Selective etching of enamel : Prior to applying Renew Universal to enamel and dentin,
etch enamel only with 35-40% phosphoric acid gel for 10-15 seconds, rinse for 5 seconds
and gently dry.
c) Total-etch technique : Prior to applying Renew Universal to enamel and dentin, etch
enamel and dentin with 35-40% phosphoric acid gel for 10-15 seconds, rinse for 5 seconds
and gently dry.
3. APPLICATION OF RENEW UNIVERSAL
a) Bottle type : Prior to dispensing, shake the bottle of Renew Universal thoroughly.
Dispense a few drops in to a clean dispensing dish. Replace bottle cap immediately.
Syringe type : Dispense the bonding agent on to the applicator tip. Using the disposable
applicator provided.
b)IMMEDIATELY apply to all repaired surfaces using the disposable applicator.
c) Leave undisturbed for 10 seconds after the end of application. Renew Universal can
provide sufficient. bonding strength even when dried immediately after application without
waiting time.
d) Dry thoroughly for 5 seconds with oil free air under MAXIMUM air pressure. Use vacuum
suction to prevent splatter of the adhesive. The final result should be a thin adhesive film with
a glossy surface and which does not visibly move under further air pressure.
4. LIGHT CURING : Light cure using a visible light curing unit for 20 seconds.
5. PLACEMENT OF LIGHT-CUREDCOMPOSITES/COMPOMERS : After having lightcured the adhesive, follow manufacturer’s instructions for use in order to place, contour and
light-cure the composite resin material of choice.
6. FINISHING : Adjust restoration, finish and polish using standard techniques.
TREATMENT OF HYPERSENSITIVE TEETH AND IMMEDIATE DENTIN SEALING
(I) APPLICATION RENEW UNIVERSAL : Refer to 1. BONDING PROCEDURE, 2.
TREATMENT OF TOOTH SURFACES and 3. APPLICATION OF RENEW UNIVERSAL.
Wait 10 seconds before drying. Note : For the treatment of hypersensitive teeth, the selfetchtechnique is recommended.
(II) LIGHT CURING : Refer to 4. LIGHT-CURING
(III) REMOVE UN POLYMERIZED LAYER : Remove the un polymerized layer of RENEW
UNIVERSAL using a moist cotton pellet.
Reviews (0) stars
₹2050.00₹3200.00 (-36%)
Out of stock
Looking to purchase product in bulk?
- Purchase item in bulk quantity
- Get at best price for your business
Reviews
There are no reviews yet.