Woodpecker Contactless Infrared Thermometer

Direction to Use

1.BODY TEMPERATURE MEASUREMENT

• Press the key for power-on, wait for the display for about 2 seconds, and the buzzer will beep once which means that the product enters the forehead temperature measurement mode.
• Point the device at the human forehead, and press the measurement button.
• With a “beep” sound, the end of the measurement and the temperature will be displayed on the screen.
• Note: When measuring, you need to aim at the forehead, <5cm for temperature measurement.

2.POWER OFF

• If there is no operation after the measurement, the product will automatically shut down in about 60 seconds.

3.CLEANING AND DISINFECTION

• The product and its accessories cannot be autoclaved.
• Do not use strong acid or alkaline solutions for disinfection.
• Before each use, the applied part on the patient should be wiped and disinfected with 75% medical alcohol.
• The product does not need to be cleaned and disinfected frequently during normal use.

When the following conditions are found, please follow the instructions.

1) EXTERNAL DIRT:

• Wipe the dirt with a clean soft cloth and water, or wipe with a cotton swab and medical alcohol.
• Wiping with medical alcohol can also have a sterilization effect.
• Take care not to add too much water or alcohol to prevent damage to the product if it flows into the interior.

2) INTERNAL DIRT:

• The internal infrared detector is an important device.
• Do not touch or press with your fingers or other objects, otherwise, the accuracy of the measurement value will be affected.
• When the infrared sensor is found to be dirty, wipe it with a cotton swab moistened with 95% absolute alcohol.

NOTE:

• Do not wipe the infrared detector with 75% sterilized alcohol (as the water traces will remain).
• Do not wipe the IR detector with other chemicals (as it will damage the IR detector).