Angelus MZ Primer
Adhesive for Metal & Zirconia
₹3470.00₹3500.00 (-1%)
Benefits
Brand warranty
Secure payments
upto 7 days returnable
Long expiry
EMI
Description
MZ Primer
Safety for the adhesion to metal and zirconia.
MZ Primer is a one-bottle solution that promotes the bonding of resins (composite, cement, acrylic) to a
variety of substrates such as metals and ceramics,including zirconia and alumina. Simple and versatile, without the need of complicated procedures, it provides long-term, reliable results.
INDICACIONES
In situations where it is necessary to increase and stabilize bonding between organic materials such as resins (composite, cement, acrylic) and inorganic materials such as metals and ceramic surfaces.
Chemical Bonding agent for metal, Zirconia and Alumina.
COMPOSITION
phema, methacrylate, PMDM, benzoyl peroxide and solvent (acetone).
RECOMMENDATION
Laboratory use: to increase the adhesion of composite and acrylic resins to metal and Zirconia structures.
Clinical use: to increase adhesion in the cementation of crowns with metal or Zirconia frameworks and to
treat metal surfaces during crown repair procedures with composite resin
Specification
Additional information
| Weight | 0.1 kg |
|---|---|
| Brands |
Features
Features
- Easy application
- Enhances adhesion of composite resins to metal, Zirconia or Alumina surfaces
- Indicated for the clinic and the laboratory
Packaging
Packaging
- 1 x 5ml
Direction to Use
Direction to Use
INSTRUCTIONS FOR USE
- CLINICAL USE
Cementing of metal-free zirconia prostheses
- Preparation of the retainer tooth:
- On natural tooth surfaces, use a bonding agent (e.g. Fusion Duralink) according to its specific
guidelines.
If the retainer tooth presents metal surfaces (e.g.a cast metal post), these should be roughened with
an abrasive microetcher/sandblaster or diamond bur, washed with abundant water and then receive a layer of MZ PRIMER (wait for 3 minutes).
IMPORTANT - Do not allow MZ PRIMER to contact the oral tissues.
- Preparation of the zirconia restoration inner surface:
1. Roughen the inner areas of the restoration with an abrasive microetcher/sandblaster (with alumina
particles);
IMPORTANT: Follow the ceramic/porcelain manufacturer’s instructions regarding the adequate
time and pressure of sandblasting.
2. Clean the restoration in an ultrasound unit for 1 minute, immersed in alcohol; Do not use phosphoric
acid for cleaning after micro etching.
3. Wash the area with abundant water and dry with air.
4. Apply a uniform layer of MZ PRIMER on the surface, wait for 3 minutes and dry with air.
5. Apply a layer of the bonding agent (e.g. Fusion Duralink) following its specific guidelines;
6. Apply the resin cement to the restoration (e.g.Cement Post) and place it on the retainer tooth.Follow the cement manufacturer´s guidelines regarding curing.Cementing of metal ceramic and metal prostheses
- Preparation of the retainer tooth:
1. On natural tooth surfaces, use a bonding agent(e.g. Fusion Duralink) according to its specific
guidelines.
2. If the retainer tooth presents metal surfaces (e.g.a cast metal post), these should be roughened with
an abrasive microetcher/sandblaster or diamond bur, washed with abundant water and receive a layer of MZ PRIMER (wait for 3 minutes).
IMPORTANT: Do not allow MZ PRIMER to contact the oral tissues.
- Preparation of internal surfaces of the metal restoration:
FAQs
FAQs
CAN MZ PRIMER BE USED FOR THE ADHESIVE CEMENTATION OF FELDSPATHIC
CERAMICS AND LEUCITE BASED CERAMICS (EX.: EMAX, VISION)?
It is possible that MZ Primer also provides good results for this procedure. However, the use
of Silano Angelus provides excellent results based on extensive scientific background.
IF MZ PRIMER IS NOT STORED IN THE REFRIGERATOR, WILL IT LOSE ITS
PROPERTIES?
The acidic monomers are highly sensitive to sudden temperature changes and a solution,
to function adequately, depends on the stability of all its components. So, it is suggested to
keep it in the refrigerator to reduce a possible alteration and to increase the shelf life of the
product. However, if the bottle is tightly closed and stored in a cool place, it will work perfectly.
IF A LARGE AMOUNT OF MZ PRIMER AND OF THE ADHESIVE SYSTEM IS APPLIED,
WILL STRONGER BOND STRENGTHS BE ACHIEVED?
Not always. In adhesive procedures, there is not a direct relationship between the amount
of material and high bond strengths. Following correctly the manufacturer’s instructions is
the best method to obtain tight and stable union.
CAN MZ PRIMER BE USED FOR THE CEMENTATION OF PROSTHESES ON IMPLANTS?
For this purpose the prosthesis must be roughened by sandblasting or by a fine diamond bur,
washed abundantly and receive a layer of MZ Primer, which should not be touched for 3 minutes.
All surface treatments must follow the instructions according to each specific substrate.
CAN THE INNER SURFACE OF ZIRCONIA PROSTHESES BE SANDBLASTED THE SAME
WAY AS METAL PROSTHESES?
Research performed on the effect of sandblasting on zirconia is not very specific and the results
depend on commercial brands. A procedure described for one brand may not provide good results and even be worse for another brand. So, it is recommended to check with the zirconia manufacturer the requirement for sandblasting.
Reviews (0) stars
₹3470.00₹3500.00 (-1%)
Looking to purchase product in bulk?
- Purchase item in bulk quantity
- Get at best price for your business
Reviews
There are no reviews yet.