API Tips For Endoactivator/Sonic Irrigator

Direction to UseTips For Endoactivator/Sonic Irrigator

API Sonic Endo activator Tips Can be very easily placed on the API sonic Activator as it has snap
On / Snap off design.

• First, prepare canal to produce a fully tapered shape
• Fill The Pulp Chamber with EDTA , NaOCl or any other final Rinsing solution
• Selection of the irrigation tip that manually fits loosely within 2 mm of working length is must
• There are Three Types of irrigation tip available – Small, Medium and large
• Place the barrier sleeve over the complete length of the hand piece
• Attach the Irrigator tip over the barrier-protected hand piece
• The Irrigator tip should snap
  on firmly, promoting a secure connection with the hand piece
•  The Irrigator tip is then passively inserted in the canal within 2mm of the WL
• The irrigator tips are moved in short 2-3 mm vertical strokes
• Hydrodynamically agitate the intracanal solution for 30-30 seconds Irrigate
• Then use intracanal suction to eliminate loose debris
• Repeat the above steps for each intracanal irrigant used.

Irrigator Tip Removal:

• Firmly Support the head of the hand piece with your thumb while grasping the white circular
  flange portion of the irrigator tip with opposite thumb and fore finger
• Use your thumb to maintain support of the handpiece and pull the irrigator tip STRAIGHT off.
  Keep the hand piece head and irrigator tip aligned During the removal process
• Keep the hand piece head and irrigator tip aligned During the removal process
• Use your thumb to maintain support of the hand piece and pull the irrigator tip STRAIGHT
  off
• The irrigator tip SNAP ON / OFF in exactly the same alignment.