Coltene Temposil 2 White Intro Kit

Direction to use

1. Gently dry the prepared tooth surface by using oil-free compressed air. Do not overdry. The best results will be achieved, when the prepared tooth surface looks moist (shiny)
2. Cleanse and dry the inside of the restoration
3. Remove the syringe plug on the syringe and discard
4. Extrude a small amount of material directly out of the syringe onto a paper towel/tissue until it is evident that base and catalyst are being ejected. This ensures proper mixing
5. Immediately wipe the syringe orifice to remove excess material
6. Attach the Mixing Tip to the syringe by aligning the prongs inside the Mixing Tip with the syringe orifice. Seat onto the syringe and twist clockwise (90°) to lock in place
7. Apply TempoSIL 2 directly from the syringe into the provisional. Seat the provisional, applying slight pressure. Secure undisturbed for 30 - 60 s
8. After setting, remove the excess material (e.g. scaler)
9. After syringe use, disinfect used Mixing Tip and store the syringe with the used Mixing Tip attached.

CLINICAL: FOR PROVISIONAL RESTORATIONS:

STEP 1:

Apply TempoSIL 2 directly into the restoration using the Oral Tip.

STEP 2:

Seat the restoration using gentle pressure.

STEP 3:

Hold the restoration in place between 30-60 s

STEP 4:

After setting, remove excess TempoSIL 2 cement.

STEP 5:

Cemented provisional restoration.

CLINICAL CASE: IMPLANT ABUTMENTS & BRIDGE:

STEP 1:

Positioned implant abutments

STEP 2:

Apply TempoSIL 2 with the Oral Tip directly into the restoration

STEP 3:

Seat the zirconia restoration by applying gently pressure.

STEP 5:

After setting, remove excess TempoSIL 2 material.

STEP 6:

Cemented zirconia restoration.