Ivoclar Tetric PowerFill Composite Syringe
Nano-Hybrid Composite for posterior restorations with short curing times starting from 3 sec and reliable depth of cure up to 4 mm
Starting at: ₹4995.00 (-13%)
Out of stock
| Ivoclar Tetric PowerFill Composite Syringe - Shade IVA |
₹4995.00 |
Out of stock | |||
| Ivoclar Tetric PowerFill Composite Syringe - Shade IVB |
₹4995.00 |
Out of stock | |||
| Ivoclar Tetric PowerFill Composite Syringe - Shade IVW |
₹4995.00 |
Out of stock |
Benefits
Brand warranty
Secure payments
upto 7 days returnable
Long expiry
EMI
Description
Tetric PowerFill – Sculptable posterior 4-mm composite for true to nature esthetic results in the posterior region with light-curing times starting from 3 seconds. It can be cured in only 3 seconds with the Bluephase PowerCure curing light or in 10 seconds with a curing light intensity of 1000 mW/cm2.
Tetric PowerFill is a light-curing radiopaque composite for the direct restorative treatment in posterior teeth. Tetric PowerFill cures with light in the wavelength range of 500-3300 nm and can be applied in layers of up to 4 mm.
Tetric PowerFill is characterized by reliable depth of cure, low shrinkage and optimum flexural strength. In short: The clinical performance of Tetric PowerFill is just as impressive and the results are just as esthetic as those achieved with conventional composites. The low stickiness of Tetric PowerFill facilitates the creation of anatomical structures.
Patented light initiator Ivocerin and Aessencio Technology
Ivocerin ensures a reliable depth of cure of composite layers of up to 4 mm. The Aessencio Technology is responsible for gradually increasing the opacity of the initially translucent 4-mm composites during the light polymerization process. Ultimately, the materials attain the translucency levels of enamel and dentin and therefore assume a true-to-nature esthetic appearance.
The highly reactive, patented light initiator Ivocerin has paved the way for the development of Tetric PowerFill and Tetric PowerFlow for esthetic posterior restorations. Conventional composites designed for the placement of large increments are often very translucent. Ivocerin-containing composites offer enamel- and dentin-like translucency levels and up to 4-mm increment placements whilst achieving a reliable depth of cure.
Shades : Tetric PowerFill is available in the following shades:
- Universal shade: IVA, IVB,
- Bleach shade : IVW
Indications : Conventional application (Light Intensity ≤ 2,000 mW/cm2)
- Restorations in the posterior region (Class I and II, including the replacement of individual cusps)
- Class V restorations (cervical caries, root erosion, wedge-shaped defects)
- Reconstructive build-ups
- Restoration of deciduous teeth
Contraindications : The placement of Tetric PowerFill restorations is contraindicated
- If a dry working field cannot be established, or the stipulated working procedures cannot be applied.
- If a patient is known to be allergic to any of the ingredients of Tetric PowerFill
Specification
Additional information
| Weight | 0.1 kg |
|---|---|
| Brands | |
| Variable | Ivoclar Tetric PowerFill Composite Syringe – Shade IVA, Ivoclar Tetric PowerFill Composite Syringe – Shade IVB, Ivoclar Tetric PowerFill Composite Syringe – Shade IVW |
Features
Features
Esthetics – Quality – Efficiency
- Chameleon effect ensures a natural shade blend
- True-to-nature esthetics for posterior restorations due to Ivocerin and Aessencio Technology
- Ivocerin and the Aessencio technology allow you to achieve the same high aesthetics as with conventional composites
- Excellent margin quality in combination with Adhese Universal
- Reliable depth of cure of increments of up to 4 mm in thickness
- Low susceptibility to process-related air entrapments
- Excellent handling properties to suit every situation
- Easy creation of anatomical structures because of low stickeness
- Fewer errors thanks to short curing times starting from 3 seconds
- Effective combination with Tetric PowerFlow
Key Specification
Key Specification
Flexural Strength : 119 MPa
Shades : Tetric PowerFill is available in the following shades:
- Universal shade: IVA, IVB,
- Bleach shade : IVW
Composition :
- The monomer matrix is composed of dimethacrylates (20– 21 wt%).
- The fillers contain barium glass, ytterbium trifluoride, mixed oxide and copolymers (79– 80 wt.%).
- Additives, initiators, stabilizers and pigments are additional ingredients (< 1.0 wt%).
- The total content of inorganic fillers is 76–77 wt% or 53 – 54 vol%.
- The particle size of inorganic fillers is between 40 nm and 3 µm
Side effects :
- In individual cases, components of Tetric PowerFill may lead to sensitization. Tetric PowerFill should not be used in such cases.
- To avoid possible irritation of the pulp, areas close to the pulp should be protected with a suitable pulp/ dentin protector (selectively apply a calcium hydroxide-based preparation in areas close to the pulp and cover with suitable cavity liner).
Shelf life and storage :
- Storage temperature 2– 28 °C (36–82 °F)
- Close syringes/Cavifils immediately after usage. Exposure to light leads to premature polymerization.
- Do not use Tetric PowerFill after the indicated date of expiration.
- Date of expiration: see information on Cavifils, syringes and packages.
| Curing Light Wavelength | Curing Time |
| 2700–3300 mW/cm2 | 3 s |
| 1800–2200 mW/cm2 | 5 s |
| 900–1400 mW/cm2 | 10 s |
| 500–900 mW/cm2 | 20 s |
Packaging
Packaging
- 1 x 3gm Ivoclar Tetric PowerFill Composite Syringe
Direction to use
Direction to use
1. Shade determination
Clean the teeth prior to shade determination. The shade is selected with the tooth still moist.
2. Isolation
Adequate relative or absolute isolation using suitable auxiliaries, such as OptraGate® or OptraDam® Plus, is required.
3. Cavity preparation
Cavity preparation is carried out according to the requirements of the adhesive technique, i.e. protecting the tooth structure. Do not prepare sharp, internal edges and angles or additional undercuts in caries-free areas. The dimensions of the cavity are generally determined by the extent of the caries or the size of the old restoration. For the posterior region, only the sharp enamel edges should be rounded (finishing diamonds, 25–40 μm). Caries-free cervical defects are not prepared, only cleaned with pumice or
other suitable cleaning pastes with the help of rubber cups or rotary brushes. Subsequently, remove all residue in the cavity with water spray and dry with water- and oil-free air.
4. Pulp protection / Base
The 3sCure mode must not be used for restorations in areas close to the pulp. Do not apply a base material when using an enamel/dentin bonding agent. Only cover very deep areas close to the pulp with a calcium hydroxide material (e.g. ApexCal®) and subsequently use a pressure-resistant cement (e.g. a glass ionomer cement, such as Vivaglass® Liner). Do not cover other cavity walls, since they can be used to support the bond with an enamel/ dentin adhesive.
5. Apply matrix / interdental wedge
Use a wrap around matrix for cavities affecting the proximal area or a sectional matrix and wedge it.
6. Conditioning / Application of the bonding agent
Condition and apply the bonding agent according to the Instructions for Use of the product in use. Ivoclar Vivadent recommends using the universal bonding agent Adhese® Universal, a single-component, light-cured adhesives for direct and indirect bonding procedures that features compatibility with all etching techniques.
7. Application of Tetric PowerFill
- In order to achieve optimum results, Tetric PowerFill should be applied in increments of max. 4 mm and adapted to the cavity walls with suitable instrument (e.g. OptraSculpt®).
- Sufficient exposure to the curing light prevents incomplete polymerization.
- The instructions for use of the curing light must be observed.
- When using a metal matrix, additionally polymerize the composite material from the buccal or lingual/palatal aspect after removing the matrix, if no Bluephase® curing light is used.
- If the light guide could not be positioned ideally, e.g. at a distance to the composite or at a diverging scattering angle, the composite material should also be light-cured again (no 3sCure mode), but observing the above mentioned safety notes.
- As an option, a flowable composite (e.g. Tetric EvoFlow®, Tetric EvoFlow® Bulk Fill or Tetric PowerFlow) can be applied. This optional layer must be cured separately (please refer to the respective Instructions for Use).
8. Finishing / Checking the occlusion / Polishing
Remove excess material with suitable finishers or fine diamonds after polymerization. Check the occlusion and articulation and apply appropriate grinding corrections to prevent premature contacts or undesired articulation paths on the surface of the restorations. Use silicone polishers (e.g. OptraPol®) as well as polishing discs and polishing strips to polish the restoration to a high gloss.
Reviews (0) stars
Starting at: ₹4995.00 (-13%)
Out of stock
Looking to purchase product in bulk?
- Purchase item in bulk quantity
- Get at best price for your business
Reviews
There are no reviews yet.