D-Tech CompoFlo Universal Flowable Composite

Direction to Use

• Clean the tooth surface using pumice and water, ensuring it is free from debris and stains. Perform a standard shade selection to determine the appropriate color match.

• Prepare the cavity using standard techniques, ensuring a clean and dry environment. Use oil-free air to gently dry the area. For optimal isolation, consider using a rubber dam to protect the tooth from contamination by saliva, blood, or sulcus fluid.

• Follow general rules of preparative dentistry to protect the pulp and deep cavities, taking necessary precautions.

• Etch the enamel margins with D tech Etching gel for 20 to 30 seconds. Rinse off the etching gel thoroughly and dry the surface using oil-free air. Apply the adhesive (Bonding) according to the manufacturer’s instructions, being careful not to desiccate the surface.

Dispensing Method:

• Select the syringe containing the desired shade of Compo-flo.
• Remove the syringe cap and insert an angled luer lock syringe tip, locking it into place.
• Place the dispensing tip as close as possible to the prepared cavity.
• Slowly push the plunger to syringe the material directly into the cavity. Alternatively, dispense the material onto a mixing pad and transfer it to the cavity using a suitable instrument.

Placement:

• To ensure complete curing, avoid placing Compo-Flo in layers exceeding 2mm thickness.

Light Cure

• Use a light curing unit to light cure the Compo-Flo Universal
• Keep the light guide as close as possible to the material’s surface.
• Refer to the provided chart for the recommended irradiation time based on the light intensity.

Note: Incomplete curing may lead to discoloration and discomfort. Ensure your light curing unit has proper light intensity. Regularly check the efficacy of the light using a light intensity meter.

Finishing:

• Remove any excess material and shape the restoration as needed.
• Finish and polish the surface using standard techniques.