Roll over image to zoom in
Unident Dental Mechanical / Flask Press
Dental Mechanical / Flask Press
₹5680.00₹5900.00 (-4%)
Benefits
Brand warranty
Secure payments
upto 7 days returnable
Long expiry
EMI
Description
Dental Mechanical / Flask Press is used in dental prosthodontic laboratories to load acrylic pressure packs for complete dentures and partials denture. The unit’s self-contained hydraulics allow up to 3500 pounds of force with minimal physical effort by means of a hand lever.
INDICATION:
- The is used to press flask to remove air bubbles.
ADVANTAGE:
- strong
- Easy handle
- Simple
Specification
Additional information
| Weight | 0.1 kg |
|---|---|
| Brands |
Features
Features
- Built for use with 2 (two) muffles.
- Pressure gauge.
- Full control at different stages of pressing.
- Required to work in laboratories, since the operator can control the pressure in the muffle.
- Little effort is required.
- It does not risk the operator.
- It provides dimensional stability of the prosthesis.
- The press does not require any special installation and initial processing before the operation.
Install on a flat level surface, so that it is stable to work, ensuring the proper height for handling.
Packaging
Packaging
1 x Dental Mechanical / Flask Press
Direction to Use
Direction to Use
Step 1:
- Prepare the flask for pressing.
Step 2:
- Place the flask on the flat surface.
Step 3:
- Turn the center spindle for the right to play the flask flange.
- Note: To reach the limit, exert a slight force on the muffle.
Step 4:
- Make sure the release valve is closed by turning the lower lever to the right.
- Then do the pressure test, moving the hydraulic lever up and down up to 0.5 tons, To drain excess resin.
- When finishing the flow of excess resin, it will be the ideal choice for the final pressing.
Step 5:
- Make the final pressing, slowly, moving the hydraulic lever up and down for up to 1.0 ton.
- As the pressing force The person was decreasing due to the stabilization of the resin inside the muffle (s), move the
hydraulic lever up and down to stabilize the pressure at 1.0 tons.
Step 6:
- After the time necessary to work, turn the side lever clockwise to loosen the release valve down to 0
ton, then turn the center spindle left to free the muffle.
Warranty
Warranty
- Manufacturer/Importer warranty of 1 Year against manufacturing defect
- Service and Warranty are handled by the manufacturer/importer directly for this product
- Dentalstall will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
- Dentalstall and the Buyer acknowledge that the Products purchased/used are a subject matter of original Manufacturer/Importer’s warranties only
- Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Dentalstall may assist the customer in registering a request to get the Product replaced or serviced.
- The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.
Reviews (0) stars
₹5680.00₹5900.00 (-4%)
Looking to purchase product in bulk?
- Purchase item in bulk quantity
- Get at best price for your business
Reviews
There are no reviews yet.