Woodpecker DTE Endo Smart Plus Cordless Endomotor
Next Generation Brushless Endomotor with Low Noise and Less vibrations .
₹27300.00₹33000.00 (-17%)
Benefits
Brand warranty
Secure payments
upto 7 days returnable
Long expiry
EMI
Description
Endo Smart + is mainly used in Endodontic treatment. It is a cordless
endo motor which can be connected to the matched Apex locator to add
an apex locator function. It can be used as a endo motor for preparation
and enlargement of root canals. By connecting the endo motor to the
matched Apex locator, the position of the file tip inside the canal can be
monitored during the procedure and many automatic functions such as
Apical Slow Down can be activated.
Advantages :-
- Autoapical Reverse Stop
- Low Noise and Less Vibrations in Handpiece
- 6:1 Super mini Contra angle allows clearer operation field
- Built-in over 30 mainstream file system
- 360 degree rotable contra-angle
Specification
Additional information
| Weight | 0.1 kg |
|---|---|
| Brands |
Features
Features
- High performance brushless motor
- 6:1 Super mini contra-angle
- Adjustable reciprocating angle
- Super high torque
- Smooth rotations
- Less noise with low vibrations
- Wireless charging
Packaging
Packaging
- 1 X Charging Base
- 1 X Motor Handpiece
- 1 X Contra angle
- 1 X Spray nozzle
- 2 X “O” ring
- 1 X Adapter
- 1 X Disposable insulation sleeves
- 2 X Protective silicon cover
- 1 X Mini8P cable
- 1 X Instruction manual
- 1 X Qualified certificate
- 1 X Warranty card
- 1 X Packaging list
Direction to Use
Direction to Use
Function and operation of product
Button definition and settings
a. Turn power on- Press Main button to turn on motor handpiece.
b. Turn power off- Hold down the Setting button “P”, then press Main button to turn off motor handpiece.
c. Customized program change- Press Adjusting button “+”/“-” during standby sate.
d. Parameter setting- Press Setting button “P” till target parameters, press Adjusting button- “+”/“-” to change, then press Main button or wait 5 seconds to confirm.
e. Preset program selection- Long press Setting button “P” to entry preset program during standby state, press Adjusting button “+”/“-” to select file system , press Setting button “P” to entry select file number, press Adjusting button “+”/“-” to
select file number, then press Main button to confirm.
Speed Setting – The speed setting can be adjusted from 100 rpm to1200 rpm.
Press Adjusting button “+”/“-” to increase or decrease speed. Long press to fast increase or fast decrease speed.
In ATR mode, speed of 100~500rpm are available.
In REC mode, speed of 100~500rpm are available.
Torque Setting – The torque setting can be adjusted from 0.4Ncm to 5Ncm.
Press Adjusting button “+”/“-” to increase or decrease torque. Long press to fast increase or fast decrease torque.
In ATR mode, the Trigger Torque of 0.4Ncm~4.0Ncm are available.
In REC mode, the torque of 2.0Ncm~5.0Ncm are available.
FAQs
FAQs
Q. When we need to charge the battery of Endomotor?
A. If the battery icon turns into display that as the picture shown,it indicates that the battery capacity is very low. Please charge. When the battery capacity is the too low, the device may indicate “Low Battery!” and automatically power off.
Q. How to make sure that my Endomotor is charging?
A. Connect the power adapter with the base. Confirm that it is well connected, and then place the handpiece into the base. If the indicator light on base turns yellow, it indicates that it is charging. If the indicator light on base turns green, it indicates that the battery capacity is enough, and there is no need to charge.After charging, please unplug the power adapter.
Q. How to switch-off the Endomotor after use?
A. In Standby Interface, the handpiece would automatically shut down after 3 minutes without any button-pressing operation. The handpiece will also automatically shut down while it is put into the charging base.In Standby Interface, long press setting key , and then long press Adjusting key, finally the device will automatically shut down 2s later.
Warranty
Warranty
- The Base, handpiece, power adapter have two years of warranty period from the date of purchase. The contra angle has one year warranty period. Other spare parts have six months warranty period.
- Service and Warranty are handled by the manufacturer/importer directly for this product
- Dentalstall will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
- Dentalstall and the Buyer acknowledge that the Products purchased/usedare a subject matter of original Manufacturer/Importer’s warranties only
- Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Dentalstall may assist the customer in registering a request to get the Product replaced or serviced.
- The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.
Reviews (0) stars
₹27300.00₹33000.00 (-17%)
Looking to purchase product in bulk?
- Purchase item in bulk quantity
- Get at best price for your business
Reviews
There are no reviews yet.