GC Flexceed Putty And Kit
Rubber Base Impression Material
Starting at: ₹1575.00 (-46%)
| GC Flexceed Light Body refill |
₹1575.00 |
-
+
|
In Stock | ||
| GC Flexceed Putty |
₹2825.00 |
-
+
|
In Stock | ||
| GC Flexceed Putty + Light Body Kit |
₹3495.00 |
-
+
|
In Stock | ||
| GC Flexceed Putty + Light Body Kit (Mini Kit) |
₹2050.00 |
-
+
|
In Stock |
Benefits
Brand warranty
Secure payments
upto 7 days returnable
Long expiry
EMI
Description
Vinyl polysiloxane impression material
FLEXCEED, with its lowest contact angle, displaces moisture and lows into subgingival areas rather than lowing away to mucosal surfaces, thus producing accurate impression detail.
It has High Initial Hydrophilicity & Viscosity . It gets pushed into the sub-gingival area easily to register the details. The flow of FLEXCEED Putty-Wash is better than most of the brands.
FLEXCEED LIGHT BODY is more hydrophilic:
The initial contact angle of a water droplet on an impression material helps measures the ability of a material to wet surfaces
FLEXCEED exhibits the highest tear strength to give an accurate impression detail everytime.
The subgingival and interproximal regions of the impression are often very thin and can tear during the removal of the impression. FLEXCEED has been tested to have the highest strength to resist tearing in comparison to other vps impression materials.
The subgingival and interproximal regions of the impression are often very thin and can tear during the removal of the impression. FLEXCEED has been tested to have the highest strength to resist tearing in comparison to other vps impression materials.
INDICATIONS:
- For impressions in cases of veneers, inlay, onlay, crown or bridge
Specification
Additional information
| Weight | 0.1 kg |
|---|---|
| Brands | |
| Variable | GC Flexceed Light Body refill, GC Flexceed Putty, GC Flexceed Putty + Light Body Kit, GC Flexceed Putty + Light Body Kit (Mini Kit) |
Features
Features
- Better reproduction detail with two viscosities (Putty & Light Body)
- Exhibits pseudo-plastic properties for precision which is not found in alginates
- Superior tear strength than any other VPS material
- Better dimensional stability – multiple models can be poured up to two weeks
- Good hydrophilicity
- Compatible with gypsum products
- Superior wetting characteristics ensuring gypsum working cast is hard with smooth surface
- Can be subjected to cold sterilization without compromising the details and dimensional stability of the impression
Packaging
Packaging
GC Flexceed Putty :
- 1 x (500g) 278ml Base
- 1 x (500g) 278ml Catalyst
GC Flexceed Putty + Light Body Kit:
- 1 x (500g) 278ml Base
- 1 x (500g) 278ml Catalyst
- 2 x 50ml Light Body
- 8 Mixing tips
GC Flexceed Light Body :
- 2 x 78gm (50mL) Cartridge
GC Flexceed Putty + Light Body Kit (Mini Kit)
- 1 x 300gm (167ml) Base
- 1 x 300gm (167ml) Catalyst
- 1 x 78gm (50mL) Cartridge
- 1 x Measuring Scoop Base
- 1 x Measuring Scoop Catalyst
- 4 x Mixing Tips
- 4 x Intraoral Tips
Direction to Use
Direction to Use
I. Single step putty wash impression
STEP 1:
Take equal quantities of FLEXCEED base & catalyst using the prescribed scoop
STEP 2:
Knead the FLEXCEED base & catalyst until a uniform blue color is achieved
STEP 3:
Load the FLEXCEED putty mix on the tray
STEP 4:
Inject the FLEXCEED light body onto the putty mix making sure that the nozzle remains immersed to prevent air entrapment
STEP 5:
Using the intra-oral tips, inject the FLEXCEED light body directly around the prepared tooth
STEP 7:
Final impression is easy to read due to the contrasting colour of FLEXCEED
II. Impression for complete denture
STEP 1:
Apply GC tray adhesive
STEP 2:
Bourder moulding using FLEXCEED putty
STEP 3:
FLEXCEED light body is loaded onto the individual tray
STEP 4:
Completed upper impression
Double step putty wash impression
STEP 1: Prepared tooth for crown
STEP 2: After applying GC tray adhesive, FLEXCEED putty Putty impression is taken is loaded on the stock tray
STEP 3: Putty impression is taken
STEP 4: Using the putty cutter, create a space for the light body
STEP 5: Inject the FLEXCEED light body around the prepared tooth, then immediately re-seat the putty tray impression
STEP 6: Final impression using FLEXCEED
Dual Arch impression
STEP 1:
FLEXCEED putty is loaded onto a dual arch tray
STEP 2:
FLEXCEED Light Body is injected over the putty Final impression. then impression is taken
Reviews (0) stars
Starting at: ₹1575.00 (-46%)
Looking to purchase product in bulk?
- Purchase item in bulk quantity
- Get at best price for your business
Reviews
There are no reviews yet.