We are delivering all over India, but the deliveries might be delayed due to the COVID-19 restrictions. Thank you for supporting us in such tough times.
-53%
, ,

Zhermack Zetaplus C Silicone Intro Kit L (Base + Catalyst + Light Body)

Brand: Zhermack

  • Zetaplus C Silicone Intro Kit is Rubber Based condensation Impression Material.

2000.00 4300.00

  • Zetaplus by Zhermack is a condensation silicone elastomeric impression material indicated for final impressions of extraorally fabricated prostheses. The Zetaplus system has been consistent in maintaining its high performance and has been accepted widely for over 25 years. Zhermack Zetaplus is a condensation silicone impression material which is hydro compatible and used for high precision impressions. It is characterized by high initial flowability in the working phase and high rigidity after hardening. It is supplied in a green color and spearmint flavor. It is mostly used in two stage technique but can also be used in single-stage technique with two viscosities. The optimum catalyst dosage increases the working time and reduces contraction. This maintains an ideal balance between working and setting time. With high-activity spheroid filler Synthetic Amorphous Silica (SAS), improved flowability and dimensional stability has been achieved.

Characteristics

  • High initial flowability and excellent rigidity after hardening for the putties
  • Thixotropy for the washes
  • High tear resistance

Advantages

    • Excellent relation between rigidity and elasticity
    • Ideal working time/setting time ratio
    • High flowability and accuracy of wash materials
    • Putty and wash materials with the same catalyst (Indurent Gel)
Weight 4.5 kg
Brands

  • Reduces mucous compression in the phase of insertion in the oral cavity
  • Excellent hardness after setting
  • In the two-stage technnique, it acts perfectly as a special tray
  • In double mixing, it adapts to the consistency of low viscosity fluid
  • Variable working and setting times according to catalyst quantity (Indurent gel)
  • Safe disinfection with Zeta 7 Solution and Zeta 7 Spray

Packaging

  • 1 x 900ml Putty
  • 1 x 60ml Catalyst
  • 1 x 140ml Light Body Tube

Directions To Use

Prepare a tooth for a crown.
After applying GC Tray adhesive, Zhermack Zetaplus putty is loaded on the stock tray.
The putty impression is taken.
Using the putty cutter creates a space for the light body.
Inject the Zhermack Zetaplus light body around the prepared tooth, then immediately re-seat the putty tray impression.
The final impression is taken.
REDUCED MARGIN OF ERROR
Clear color contrast to reduce the risk of error, consequently saving time and material.
BALANCED REACTIVITY
Ideal balance between working time and setting time. (Snap-set effect).
The optimal dosage of the catalyst increases the available working time and reduces contraction
FLOW CONDITIONING” EFFECT
Increased flowability and extreme dimensional stability are achieved thanks to SAS (Synthetic Amorphous Silicas) high-activity spheroid fillers.

Features

  • The different scents, from mint to orange, are pleasant for the patient and professionals.
  • Variable working and setting times according to catalyst quantity (Indurent gel)
  • Reduces mucous compression in the phase of insertion in the oral cavity.
  • Excellent hardness after setting.
  • In the two-stage technique, it acts perfectly as a special tray, In double mixing, it adapts to the consistency of low viscosity fluid.
  • Variable working and setting times according to catalyst quantity (Indurent gel)
  • Safe disinfection with Zeta 7 Solution and Zeta 7 Spray.
  • Excellent relation between rigidity and elasticity
  • Ideal working time/setting time ratio
  • High flowability and accuracy of wash materials
  • Putty and wash materials with the same catalyst.
  • High initial flowability
  • Green color
  • Spearmint flavor

Specifications

Technical Information:

ISO 4823 – ADA 19 Type 0 Putty Consistency
Mixing time 30”
Total working time (23°C/73°F) 1′ 15”
Time in mouth 3′ 15”
Setting time (23°C/73°F) 4′ 30”
Compressive deformation (min-max) 2 -5 %
Elastic recovery >98%
Dimensional stability (after 24 h) <-0.2%

High initial flowability and excellent rigidity after hardening 

• Thixotropy for the washes

• High tear resistance

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Zhermack Zetaplus C Silicone Intro Kit L (Base + Catalyst + Light Body)”

There are no reviews yet.

    Bulk Purchase