Voco Ionofil Plus Powder/Liquid

Glass ionomer filling cement

Starting at: 720.00 (-50%)

Voco Ionofil Plus Refill Liquid 10ml 720.001450.00
In Stock
Voco Ionofil Plus Refill Powder 15g 1370.002750.00
In Stock


Brand warranty

Secure payments

upto 7 days returnable

Long expiry



Glass ionomer filling cement with new glass technology.


  • Spreadable consistency
  • Good marginal adaptation
  • Good translucency
  • Improved glass ionomer technology
  • Good aesthetics


  • Restoration of V-shaped defects and cervical enamel erosions
  • Linings
  • Restoration of deciduous teeth
  • Treatment of carious lesions
  • Class III fillings


Additional information

Weight 0.1 kg


Voco Ionofil Plus Refill Liquid 10ml, Voco Ionofil Plus Refill Powder 15g



Ionofil Plus Refill Liquid 10ml:

  • 1 x 10ml Bottle.

Ionofil Plus Refill Powder 15g:

  • 1 x 15g Bottle

Direction to Use

Direction to Use

  • Place powder and liquid on a glass plate or a suitable mixing pad and work the powder into the liquid a little at a time to begin with, then in larger quantities.
  • Use 1 drop of liquid for 1 level measuring scoop of powder (mixing ratio: 4.7 – 5.6 g of powder : 1 g of liquid).
  • When dispensing the liquid, hold the dropper bottle absolutely vertically.
  • A strong plastic spatula should be used for mixing.
  • The mixing time is 30 – 40 s (it should not exceed 1 min).
  • The working time after mixing is approximately 2 – 3 min (the temperature should be 15 °C – 23 °C).
  • After insertion of the material into the cavity, the setting time is approximately 2.5 min.
  • During the filling procedure make sure that the working area is kept dry.
  • Class V cavities should be at least 1 mm deep.
  • Avoid feather-shaped margins.
  • In case of doubt prepare in a conventional way.
  • During the setting phase, especially immediately after application, glass ionomer cements are sensitive to humidity (breath, saliva) and also to drying-out. Therefore, if possible, apply a protective varnish immediately.
  • After setting of Ionofil Plus, but no sooner than 5 – 6 min after application (depending on mixing temperature and mixing ratio) excess material may be removed with a sharp instrument and contouring can be carried out (flexible disks).
  • Then cover again with varnish.
  • The best results for final polishing can be obtained about 24 h after the filling has been inserted.

Reviews (0) stars

Be the first to review “Voco Ionofil Plus Powder/Liquid”


There are no reviews yet.

Starting at: 720.00 (-50%)

Voco Ionofil Plus Powder/Liquid

Looking to purchase product in bulk?

  • Purchase item in bulk quantity
  • Get at best price for your business

Get Customized Price